Mint NextMove PCI Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
MintMT ActiveX Methods 7-7
Number Macro Description
1049 erINVALID_CONTROLLER_TYPE Invalid controller enumeration
1050 erINVALID_COMMS_ADDRESS Comms address out of range
1051 Error 1051 removed
1052 Error 1052 removed
1053 erUSER_ABORT The user aborted the command
1054 erCONTROLLER_REPORTS_ERROR The controller detected error
1055 Error 1055 removed
1056 erRECEIVE_BUFFER_EMPTY The receive buffer is empty
1057 erTRANSMIT_BUFFER_FULL The transmit buffer is full
1058 erINVALID_RETRIES The retries parameter failed
1059 erBAD_SQUASH_FILE Bad squash file parameter.
1060 erUNDEFINED_SERIAL_ERROR The serial error is unknown
1061 erPSERIAL_BUFFER_CORRUPTION The serial buffers are corrupt
1062 erFUNCTION_NOT_SUPPORTED Not supported on this platform
1063 erCANNOT_OPEN_FILE File bad or doesn't exist
1064 erINVALID_FORMAT File not proper COFF format
1065 erDATA_TOO_LONG Too much data in one chunk
1066 erINCORRECT_ARRAY_SIZE Array size or pointer incorrect
1067 erUNKNOWN_ERROR_CODE The error code was not known
1068 erCONTROLLER_NOT_RUNNING The controller is not running
1069 erMML_VERSION_MISMATCH Build number incorrect
1070 erNO_DEVICE_DRIVER_SUPPORT Device driver not set up
1071 erBAD_COM_PORT_NUMBER Com port not supported
1072 erBAD_BAUD_RATE Baud rate not supported
1073 Error 1073 removed
1074 Error 1074 removed
1075 Error 1075 removed
1076 Error 1076 removed
1077 Error 1077 removed
1078 erLINE_TOO_LONG Line too long for MINT
1079 erINVALID_PLATFORM Invalid firmware for controller
1080 erNO_INTERRUPT_REGISTERED No interrupt registered
1081 erINVALID_IRQ Invalid IRQ parameter
1082 erBAD_INPUT_BUFFER Input buffer wrong size
1083 erBAD_OUTPUT_BUFFER Output buffer wrong size
1084 erBAD_DEVICE_DRIVER_CALL The device driver call failed
1085 erSEMAPHORE_TIMEOUT A semaphore was not available
1086 erINVALID_EVENT Could not register the event
1087 erFUNCTION_NOT_AVAILABLE Function not currently available
1088 erBOOT_TEST_FAIL Power-up self test failed
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

Comentarios a estos manuales

Sin comentarios